Compact and easy to use solution
This new MS solution has been developed for in-situ treatment of the water arising from construction sites: seepage, surface or washing water, etc. It is designed to recover and treat such effluents on site before discharging them to the environment or in the sewage network.
In the form of a compact settling skid, the whole plant is pre-assembled and pre-wired in our workshop, ensuring a fast and easy installation and commissioning on site (no specific civil works required) as well as easy transport and implementation on your different construction sites.
Average flow: 2 to 10 m3/h - Peaks up to 20 m3/h
The MS Settling Skid 2 to 10 m³/h offers the best technical and economic value for our range. Recently developed by MS, this technical variant offers maximum process while remaining as simple as possible.
We draw attention to the fact that this technical and economical variant requires a monitoring and the regular presence of an operator to:
- Adjust batching of coagulant, flocculant and acid
- Perform cleaning operations of the different tanks
- Recirculate effluents in case of non-compatibility with the discharges contraints, after a visual check
This entire process is summarized in the flow-sheet below:
After a visual check, the operators will organize the regular cleanings of the different compartments, to be performed by a specialized sludge pumping company.
The whole plant is fitted into a 40’ container, which is pre-assembled and pre-wired in our workshop, ensuring a fast and easy installation and commissioning on site.
Water treatment unit for the elimination of Chromium VI and Total Chromium in waste water.
WORKSITE WATER TREATMENT PLANT 10 M3/H
This new solution has been developed for in-situ treatment of the water arising from construction sites: seepage, surface or washing water, for average flow from 2 to 10 m3/h and peaks up to 20 m3/h.